perma FLEX

The automatic lubrication system perma FLEX is available in two convenient sizes (60 cc | 125 cc). It can be used for inside or outside applications at temperatures ranging from -4 °F to 140 °F | -20 °C to +60 °C. Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator.
perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated. The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.

All-in-one system with rotary switch for discharge period setting
Reliable operation at -4 °F to 140 °F | -20 °C to +60 °C
Ex-proof certification, FM certification

perma FLEX is a single-point lubrication system for all types of applications and industries. Ingress protection to IP 68 level guarantees reliable lubrication in extremely dusty and moist environments. The wide operating temperature range makes it suitable for many applications indoors and outdoors. If necessary, the discharge period can be adjusted even after activation. It can be switched off during longer non-operation periods.

Pumps

Blowers / fans

Roller bearings

Sliding bearings

Open gears

Spindles

Shaft seals

Chains

All-in-one system with rotary switch for discharge period setting

Reliable operation at -4 °F to 140 °F | -20 °C to 60 °C

Ex-proof certification, FM certification

Drive	Gas generating unit
Housing	Transparent plastic
Discharge period	1, 2, 3, ... 12 months
Lubricant volume	60 cc, 125 cc \| 2.03, 4.23 oz
Operating temperature	-4 °F to 140 °F \| -20 °C to 60 °C
Pressure build-up	max. 75 psi \| 5 bar
Lubricants	Grease up to NLGI 2 \| oil
Protection class	IP 68
Max. tube lengths	6.5 ft \| 2.00 m
CE	✓️
Ex	✓️️
IEC Ex	✓️
FM	✓️