Applications for perma PRO MP-6 multi-point lubrication system include roller and sliding bearings, linear guides, open gears, spindles as well as shaft seals on motors, generators, pumps and fans. Applications range from the automotive industry and combined heat and power stations, to the paper industry and mining, and steel industry sectors.
Setting via push button with display and LED
- Easy configuration
- Display of remaining volume and active outlets
- Status control on display
MP-6 distributor with 6 outlets – Number of active outlets can be user-defined
- Supply of 1 to 6 lubrication points with same lubricant amount
- Precise supply of lubrication points
- Monitoring of lubrication point status
Pressure build-up to 362 psi allows remote mounting up to 16 ft per outlet
- Mounting outside of dangerous areas increases workplace safety
- Higher equipment availability since LC can be exchanged during running operation
| Drive | Electromechanical |
|---|---|
| Power supply | Battery operation supply 15-30 V |
| Housing | Metal / Transparent plastic |
| Discharge period | 1 day to 24 months |
| Lubricant volume | 250 cc, 500 cc | 8.45, 16.90 fl. oz |
| Operating temperature | -4 °F to 140 °F | -20 °C to 60 °C |
| Pressure build-up | Max. 360 psi | 25 bar |
| Number of outlets | 1 - 6 |
| Lubricants | Grease up to NLGI 2 |
| Max. tube lengths | 16 ft | 5.00 m |
| CE | ✓️️ |
| UL | ✓️ |
Further information & contact
Our staff will be happy to advise you at any time. Commonly asked questions regarding this product are available in the FAQs section.
