perma USA
Applications

Conveyors

Watch video
Download Flyer

Functioning conveyors are essential for smooth process flows. 

Despite dirt, dust or strong vibration, optimal lubrication is necessary to prevent equipment failures. Costly repairs and service visits represent a significant part of operating costs, which can be minimised significantly by using perma lubrication systems.

Challenges

Large conveyors often extend over long distances and several levels and are difficult to access. Relubrication should ideally take place while the equipment is running. Many transfer points can only be lubricated with the help of catwalk grating or work platforms and are therefore often neglected. Accident prevention and workplace safety must be ensured at all times.

Lubrication points are often neglected because they are located up high, around the back, or in places with little room to maneuver. Maintenance work in such areas during operation is extremely dangerous and jeopardizes workplace safety.

Lubrication starvation results in wear, leads to failure of equipment components and reduces productivity and cost effectiveness.

Dirt and water must not enter the lubrication points
Dirt and water must not enter the lubrication points
No unnecessary equipment downtimes due to relubrication
No unnecessary equipment downtimes due to relubrication
Workplace safety must be ensured
Workplace safety must be ensured

Lubrication points

Pillow block housings with spherical roller bearings are mainly used for drive and bend pulleys.

Bearings and bearing housing seals must be permanently supplied with lubricant.

Solutions

Mount a perma lubrication system at the lubrication point. Depending on the conditions prevailing at the lubrication point, the perma lubrication system can either be mounted directly or remotely.

Direct mounting on the lubrication point: e.g. perma CLASSIC
  • Easy, quick mounting
  • For lubrication points with little vibration / shocks
  • For easy-to-reach, safe lubrication points
Remote mounting to the lubrication point: e.g. perma STAR VARIO
  • For lubrication points with strong vibration / shocks (isolation of lubrication system)
  • For lubrication points which are unsafe to access: Mounting in safe areas
  • For hard-to-reach lubrication points
Laine Fury

Laine Fury

Vice President Sales

Any more questions?

Simply contact us by phone or email for an individual consultation on conveyors.

Advantages of automatic lubrication

Prevent contamination

No interruption

Accident prevention

Lower environmental impact