perma USA
Applications

Electric motors

Watch video
Download Flyer

Electric motors are used for a variety of applications where they convert electricity into mechanical energy.

Efficient lubrication and maintenance practices are essential for reliable operation of electric motors. Many motors are located in poorly accessible locations or in dangerous areas. Therefore, many of them are lubricated at irregular intervals. Failure to adhere to manufacturer specifications frequently leads to damage and failures due to over-lubrication or lubrication starvation.

Challenges

During manual lubrication, the grease is applied in uneven amounts. A large quantity of lubricant is introduced at one time. This leads to a temporary over-lubrication of bearings. Ignoring the recommended relubrication intervals leads to lubrication starvation.

Relubrication during running operations (manufacturer recommendations) jeopardises maintenance staff. The risk of accidents increases when people spend time in dangerous or hard-to-reach areas.

Bearing heating and possible fire hazard since it takes hours to distribute excess grease
Bearing heating and possible fire hazard since it takes hours to distribute excess grease
Possible shut-off with temperature monitoring
Possible shut-off with temperature monitoring
Bearing damage due to lubrication starvation results in unscheduled machine downtimes and higher production costs
Bearing damage due to lubrication starvation results in unscheduled machine downtimes and higher production costs
Increasing maintenance costs caused by premature wear
Increasing maintenance costs caused by premature wear
High accident risk
High accident risk
Motor shut-down when entering secured areas
Motor shut-down when entering secured areas

Lubrication points

Lubrication points are located on the drive and non-drive end of electric motors. When relubricating, you must ensure that excess grease is discharged through the discharge openings, grease relief ports or grease traps. Bearings will overheat if grease cannot escape and / or if grease traps are filled up with used grease.

Solutions

Mount a perma lubrication system at the lubrication point. Depending on the conditions prevailing at the lubrication point, the perma lubrication system can either be mounted directly or remotely.

Direct mounting on the lubrication point: e.g. perma NOVA
  • Easy, quick mounting
  • For lubrication points with little vibration / shocks
  • For easy-to-reach, safe lubrication points
Remote mounting to the lubrication point: e.g. perma STAR VARIO
  • For lubrication points with strong vibration / shocks (isolation of lubrication system)
  • For lubrication points which are unsafe to access: Mounting in safe areas
  • For hard-to-reach lubrication points
Laine Fury

Laine Fury

Vice President Sales

Any more questions?

Simply contact us by phone or email for an individual consultation on electric motors.

Advantages of automatic lubrication

Minimised overheating

Predictable exchange intervals

Workplace safety

Lower environmental impact