perma USA
Applications

Blowers / Fans

Watch video
Download Flyer

Blowers and fans are used in almost all industries. 

They provide adequate amounts of primary and secondary air. Flue gas fans remove air containing dust, gases and harmful substances. In primary air zones, induced draft fans are used in scrubbers, dust collectors, heat exchangers and desulfurisation plants.

Challenges

Blowers / fans are normally operated under extreme conditions. Contaminants such as dust or pumped media are raised and may infiltrate the bearing system. This causes increased wear in individual components and reduces service life.

Regular lubrication of bearings and seals is imperative. Lubrication points are often extremely dirty and hard to reach, which makes maintenance even more difficult. Specified lubrication intervals are neglected or not observed for this reason. The resulting lubrication starvation leads to increased wear and in extreme cases to failure of the blowers and fans.

Contaminants (e.g. dust) raised in the air must not enter the lubrication points
Contaminants (e.g. dust) raised in the air must not enter the lubrication points
Excessive overheating of bearing points due to lubrication starvation
Excessive overheating of bearing points due to lubrication starvation
Lubricants must be able to withstand demands, such as vibrations and high speeds
Lubricants must be able to withstand demands, such as vibrations and high speeds
Compliance with relubrication intervals, depending on bearing type, bearing size and ambient conditions</span><span> 
Compliance with relubrication intervals, depending on bearing type, bearing size and ambient conditions 

Lubrication points

The lubrication points (roller bearings) are located at the drive shaft between drive motor and fan impeller.

Bearing and sealing of fan drive shaft is normally done by means of a pillow block housing or a bearing unit. These must be permanently supplied with the specified amount of the right lubricant.

Solutions

Mount a perma lubrication system at the lubrication point. Depending on the conditions prevailing at the lubrication point, the perma lubrication system can either be mounted directly or remotely.

Direct mounting on the lubrication point: e.g. perma FLEX
  • Easy, quick mounting
  • For lubrication points with little vibration / shocks
  • For easy-to-reach, safe lubrication points
Remote mounting to the lubrication point: e.g. perma STAR VARIO
  • For lubrication points with strong vibration / shocks (isolation of lubrication system)
  • For lubrication points which are unsafe to access: Mounting in safe areas
  • For hard-to-reach lubrication points
Laine Fury

Laine Fury

Vice President Sales

Any more questions?

Simply contact us by phone or email for an individual consultation on blowers / fans.

Advantages of automatic lubrication

No contamination

Precise metering

Safe lubrication

Exact adjustment