perma LUBE BOOK

Bio-degradable for all applications Additives The tribological properties of the lubricant are enhanced with additives. The additives, such as anti-wear (AW) additives or EP additives, are mixed with the base oil. Additives are selected specifically for each particular application to ensure the required properties. Depending on the application concerned, additives can be used for specific purposes, such as increasing pressure resistance and shear strength. perma offers a wide range of high-quality lubricants meeting many different requirements. Their consistently high quality has impressed different industries for many years. These lubricants are developed especially for use in perma lubrication systems in cooperation with leading manufacturers. All lubricants are tested and monitored under laboratory conditions and in real applications to ensure optimal function in perma lubrication systems. Speed index = dk The speed index indicates the maximum speed for various bearing types for which a specific lubricant is suitable. perma overviews specify the speed indexes for grease lubrication of deep groove ball bearings. Calculation: n x dm = speed factor dk dm = (D + d) ÷ 2 n = Operating speed (1/min); D = Outside bearing diameter (mm); d = Inside (bore) bearing diameter (mm) Operating temperature The operating temperature is the temperature range within which the lubricant is guaranteed to function reliably. Using the lubricant outside this range can lead to damage. Name Æ Æ Lubricant properties Æ Æ Labelling as per DIN 51 517-3 Base oil Operating temperature (°C) Viscosity at +40 °C [mm 2 /s] perma High performance oil SO14 (CLPE 320) Æ Æ Lubricates effectively even at high operating temperatures Æ Æ Good viscosity / temperature behaviour Æ Æ Special creep properties ensure rapid film formation Ester oil + synthetic hydrocarbon oil -20 to +250 320 - - -  perma Multipurpose oil SO32 (CLP 100) Æ Æ High performance transmission & multipurpose oil Æ Æ Ageing- & oxidation-resistant Æ Æ Good wear protection for gear teeth & roller bearings Mineral oil -5 to +100 100     perma Bio oil, low viscosity SO64 (CLPE 100) Æ Æ Low-viscosity multipurpose oil Æ Æ Rapidly biodegradable Æ Æ Good viscosity / temperature behaviour Ester oil -30 to +110 100     perma Bio oil, high viscosity SO69 (CLPE 460) Æ Æ High-viscosity multipurpose oil Æ Æ Rapidly biodegradable Æ Æ Good wear protection Ester oil -20 to +110 460     perma Food grade oil H1 SO70 (CLPH 220) Æ Æ Broad operating temperature range Æ Æ Very good ageing & oxidation resistance Æ Æ Good wear protection PAO + ester oil -30 to +120 220     Chains Oils Sliding bearings Sliding guides Open gears Gear racks Spindles The correct lubricant for a longer service life perma Lubricants Food, beverage, tobacco and pharma industry | 82 C